Wi-Fi that works in every room.
UniFi hardware, access points placed from a site survey, VLANs that keep devices apart, and WireGuard for getting in from outside.
Built on UniFi
Bighorn Byte builds on Ubiquiti UniFi. Routers, switches, and access points from one product line, managed from a single console, so there is one place to look when something breaks. The same gear scales from a house to a shop floor.
Full Wi-Fi coverage
I walk the building with a survey tool, place access points where the signal actually has to reach, then set channels and power so devices hand off between them without dropping.
- •Site survey before install
- •Band steering between 2.4 and 5 GHz
- •Interference-free channel selection
Network segmentation
VLANs isolate different device types so a compromised smart bulb can't access your financial data. Separate networks for trusted devices, guests, IoT, and cameras.
- •Isolated guest network
- •IoT device quarantine
- •Firewall rules between segments
WPA3, filtering, and VPN
WPA3 on the wireless, intrusion detection on the gateway, DNS filtering against known bad domains, and WireGuard for getting in from outside. All of it turned on and left on.
- •WPA3 encryption
- •WireGuard VPN for remote access
- •DNS-level threat blocking
Other ways Bighorn Byte can help
The same visit usually touches more than one of these.
Network not holding up?
Tell me what keeps dropping and where in the building. Nothing that already works gets replaced.